Our signs for EPL drives developed for better identification of the address on the EPL drive. The signs are made of PETG using two-tone 3D printing and are simply clipped into the holes in the clamping screws.
Since there are differences in the distance between the screw holes, you can choose between several variants.
Screw hole variant 1: The distance between the holes is exactly 5 mm, they are usually the older ones, with slotted screws in the connection terminals, called “slotted” for short.
Screw hole variant 2: The distance between the holes is exactly 5.5 mm, they are mostly the newer ones, with Phillips screws in the connection terminals, called “cross” for short, but they are now also available with a slot again. If you want to be on the safe side, you should measure the distance or opt for a combination set.
The signs are offered in 2 color combinations black / white and black / red.
All sets are supplied on a sturdy 3 mm PS plate to keep track of things. For current prices, please refer to our price list, which you can find under Donwload.
The following sets are offered:
WS set 100 SW / RT slot: slot numbers 1-100 black / red spacing 5 mm
WS set 100 SW / WS slot: slot numbers 1-100 black / white spacing 5 mm WS set 100 SW / RT cross: Cross numbers 1-100 black / red spacing 5.5 mm
WS set 100 SW / WS cross: Cross numbers 1-100 black / white spacing 5.5 mm
WS-Combi set 50 SW / RT: 50 numbers 1-50 black / red spacing 5 mm and 50 numbers 1-50 black / red spacing 5.5 mm
WS combination set 50 SW / WS: 50 numbers 1-50 black / white spacing 5 mm and 50 numbers 1-50 black / white spacing 5.5 mm
WS set 50 SW / WS slot: 50 numbers 1-50 each black / white, spacing 5 mm
WS set 50 black / white cross: 50 numbers 1-50 each black / white, spacing 5.5 mm
WS set 50 SW / RT slot: 50 numbers 1-50 each black / red, spacing 5 mm
WS set 50 black / white cross: 50 numbers 1-50 black / white, spacing 5.5 mm
If we aroused your interest, please contact us via email.